Merchant adjudication

Choose who decides your claims, set up your claims team and its approval limits, and use the AI coverage assessment to reach a decision.

Either SureBright decides your claims or your own team does. Read this page before you ask SureBright to let your team decide its own claims, and when you set up the people who will work them.

Who decides your claims#

Set-upWhat it means for you
SureBright decides (the default)SureBright's team opens, assesses, decides, writes to the customer and settles. Where the Adjudicator Portal is enabled, you can read every claim against your contracts. Your team acts only when SureBright asks for something: order details, an inspection of a returned unit, or a replacement or repair you supply.
Your team decidesYour team works claims from start to finish. SureBright staff can read a claim, but the controls that act on it are locked for them unless they deliberately take over. Anything they then do is recorded in your organisation's name and visible to you.

Only SureBright can switch you from one to the other, so ask your SureBright contact. Before you switch to deciding your own claims, your team needs at least one org admin, because only an org admin can invite the rest of the team.

In both set-ups one decision settles the claim. There is no second review after it: approving moves the claim to Awaiting fulfilment, and marking it fulfilled closes it. See How a claim moves.

Settings SureBright keeps for your organisation#

How claims are handled is set per organisation by SureBright. To change a setting, ask your SureBright contact. A change applies to claims filed from then on; claims already open keep the settings they were filed under.

SettingChoicesDefaultWhat it changes
Resolutions offeredReplacement, RepairReplacementWhat an approval in the portal can give the customer. Repair is switched on by SureBright where its service network covers your products. Other settlements, such as a reimbursement, are arranged by SureBright. See Resolutions and payouts.
AutomationOff, Suggest or Auto, chosen separately for each of the three tasks belowSuggestHow much the AI does before a person steps in.
Money ceiling for automated decisionsAn amount0The most an automatic coverage decision may commit on a single claim without a person. At zero, the AI can still read, classify and draft, but anything that commits money waits for a person.
Time before a claim counts as lateHours72How long a claim can wait in a stage before the ledger marks it as over.

Every claim is visible to SureBright as well as to your team.

What automation does at each level#

TaskOffSuggestAuto
Reading inbound email into a claimAn email waits for a person to open a claim from itThe email is read into a draft claim for a person to confirmThe email is read into a claim automatically
Deciding whether the plan covers the incidentA person decides with no AI inputThe AI proposes a coverage decision and a person approves itThe AI's decision counts straight away, within the money ceiling
Drafting customer messagesNo drafts are preparedDrafts are prepared; a person edits and sendsDrafts are prepared; sending still needs a person

At every level, the only customer email that goes out by itself is the acknowledgement when a claim is filed. See Claim communications.

Set up your claims team#

Access to claims comes from a person's role on the claims team, which you manage under Team in the Adjudicator Portal. A Merchant Portal role (owner, admin or sales associate) gives no access to claims: an owner who is not on the claims team cannot read a claim.

RoleCan
Org adminEverything an ops member can, plus invite and remove members, set each member's approval limit, change the customer email wording, browse the full contract list and override a recorded decision
OpsWork claims from start to finish: open, assign, assess, decide, draft and send messages, mark a claim fulfilled, write notes, compose a repair plan and decide repair estimates
ViewerRead claims, their evidence, decisions and messages, and the repair plan, estimates, invoices and service record. Change nothing.

Each member also has:

  • Scope: which claims they see. Your members see your own organisation.

  • Approval limit: the most they may approve on a single claim. When a claim is worth more than a member's limit, the portal says so and someone with a higher limit has to approve it. The member can still decline it. Leave the limit blank for no limit.

Invite a team member#

  1. Open Team

    In the Adjudicator Portal, open Team. Only an org admin sees it.

  2. Send the invitation

    Under Invite someone, enter the person's Email, choose a Role and, if you want one, an Approval limit. Click Send invitation.

  3. Wait for SureBright to approve it

    SureBright reviews each invitation. Until then it is listed under Awaiting SureBright approval and nothing is sent to the person. You can withdraw it with Revoke invitation.

  4. The person signs in

    Once approved, the person is emailed a sign-in link and appears under Members. Someone who already has a SureBright account is granted access straight away and can work claims the next time they sign in.

To change someone later, find them in the Members table: pick a new role and confirm with Change role, edit their approval limit, or click Revoke access. Their decisions on past claims stay on record.

How the AI coverage assessment helps you decide#

When a claim is filed, and again whenever new evidence or a corrected description arrives, the AI reads the customer's account and the photographs against the plan's coverage for that product and proposes an answer. You see it on the claim under Coverage assessment, with its reasoning, the parts of the plan it rests on and the words it quoted from the customer.

The assessment saysWhat it meansWhat you can do
CoveredThe plan covers this incident. It may rest on a condition you should check first, listed under What this answer assumes (for example, that the customer has really lost use of the product).Approve, or decline if you disagree
Not coveredThe plan excludes this incident.Decline with a reason, or approve anyway and say why
An answer with a cautionThe AI reached an answer, but something is worth reading first, such as a photograph already used on an earlier claim.Read the caution, then decide
Agent could not assess this claimNo answer. The assessment says what would unblock it: clearer photographs, more detail, more than one incident in the account, a product that does not match, or a gap SureBright has to fix.Click Request info to ask the customer, or decide by hand
A service matterThe request is about a service or benefit, not a claim on the product.Read the assessment, then decide

Cautions, such as a photograph that contradicts the account, no evidence supplied or no incident date, travel with the answer. They never change it by themselves. The AI's quotes are checked against what the customer actually wrote, and an answer that rests on words the customer did not write is flagged for you to read yourself.

The assessment proposes, you decide#

With automation on Suggest, the default, an assessment changes nothing about a claim until a person acts on it.

  • To act on it, click Approve or Decline on the claim.

  • To ask the customer for what is missing, click Request info. The questions the assessment raised are filled in for you to edit and send.

  • To get a fresh answer after new evidence arrives, click Run it again.

  • If you disagree, click Write my own reading and record your own answer and why. Both readings stay on the claim, and SureBright uses your corrections to improve later assessments.

Record the decision#

You clickWhat happens
Approve, then Approve claimYou choose Replacement or Repair where both are offered. The claim moves to Awaiting fulfilment and the approval email is prepared for the customer.
Decline, then Decline claimYou must pick a Reason, from Never qualified or Not covered by the terms. The claim closes as Declined, the customer is told the reason in fixed wording, and a 30-day appeal window opens. An appeal brings the claim back to a person.

You can add a Rationale to either. It is saved on the claim and is not sent to the customer.

A recorded decision is never edited or deleted. An org admin can override one, which records a new decision beside the old one, and both stay visible. Overriding is limited to org admins because it changes an outcome the customer has already been told about.

Early access. The team, the assessment and the decision are worked in the Adjudicator Portal, which is enabled per organisation. Ask your SureBright contact. The claim settings apply to every organisation at their defaults.

When SureBright asks you to inspect a returned unit#

For some products SureBright asks you, the seller, to inspect the claimed unit before the claim is decided. You do the inspection; SureBright still makes the decision.

  1. Receive the unit

    SureBright tells you which claim the unit belongs to. If you need a return label for the customer, ask support on that claim before the customer ships.

  2. Inspect it and send your findings

    Reply to support with the claim number and what you found: the fault, its likely cause, whether it can be repaired, and photographs. Say plainly if you think the fault is damage rather than a breakdown, or if it matches an earlier claim on the same unit.

  3. SureBright decides

    SureBright passes your findings into the claim review. SureBright then contacts the customer with the outcome or the next step.

If the customer disputes your diagnosis, do not argue the claim with them. Send the claim number and the customer's objection to support. A declined customer can also appeal within 30 days, and the appeal is reviewed by a person. See How a claim moves.