---
title: "Merchant adjudication"
description: "Choose who decides your claims, set up your claims team and its approval limits, and use the AI coverage assessment to reach a decision."
---

Either SureBright decides your claims or your own team does. Read this page before you ask SureBright to let your team decide its own claims, and when you set up the people who will work them.

## Who decides your claims

| Set-up | What it means for you |
|---|---|
| SureBright decides (the default) | SureBright's team opens, assesses, decides, writes to the customer and settles. Where the Adjudicator Portal is enabled, you can read every claim against your contracts. Your team acts only when SureBright asks for something: order details, an inspection of a returned unit, or a replacement or repair you supply. |
| Your team decides | Your team works claims from start to finish. SureBright staff can read a claim, but the controls that act on it are locked for them unless they deliberately take over. Anything they then do is recorded in your organisation's name and visible to you. |

Only SureBright can switch you from one to the other, so ask your SureBright contact. Before you switch to deciding your own claims, your team needs at least one org admin, because only an org admin can invite the rest of the team.

In both set-ups one decision settles the claim. There is no second review after it: approving moves the claim to **Awaiting fulfilment**, and marking it fulfilled closes it. See [How a claim moves](/claims/overview).

## Settings SureBright keeps for your organisation

How claims are handled is set per organisation by SureBright. To change a setting, ask your SureBright contact. A change applies to claims filed from then on; claims already open keep the settings they were filed under.

| Setting | Choices | Default | What it changes |
|---|---|---|---|
| **Resolutions offered** | **Replacement**, **Repair** | **Replacement** | What an approval in the portal can give the customer. **Repair** is switched on by SureBright where its service network covers your products. Other settlements, such as a reimbursement, are arranged by SureBright. See [Resolutions and payouts](/claims/resolutions-and-payouts). |
| **Automation** | **Off**, **Suggest** or **Auto**, chosen separately for each of the three tasks below | **Suggest** | How much the AI does before a person steps in. |
| **Money ceiling for automated decisions** | An amount | 0 | The most an automatic coverage decision may commit on a single claim without a person. At zero, the AI can still read, classify and draft, but anything that commits money waits for a person. |
| Time before a claim counts as late | Hours | 72 | How long a claim can wait in a stage before the ledger marks it as over. |

Every claim is visible to SureBright as well as to your team.

### What automation does at each level

| Task | **Off** | **Suggest** | **Auto** |
|---|---|---|---|
| Reading inbound email into a claim | An email waits for a person to open a claim from it | The email is read into a draft claim for a person to confirm | The email is read into a claim automatically |
| Deciding whether the plan covers the incident | A person decides with no AI input | The AI proposes a coverage decision and a person approves it | The AI's decision counts straight away, within the money ceiling |
| Drafting customer messages | No drafts are prepared | Drafts are prepared; a person edits and sends | Drafts are prepared; sending still needs a person |

At every level, the only customer email that goes out by itself is the acknowledgement when a claim is filed. See [Claim communications](/claims/communications).

## Set up your claims team

Access to claims comes from a person's role on the claims team, which you manage under **Team** in the Adjudicator Portal. A Merchant Portal role (owner, admin or sales associate) gives no access to claims: an owner who is not on the claims team cannot read a claim.

| Role | Can |
|---|---|
| **Org admin** | Everything an ops member can, plus invite and remove members, set each member's approval limit, change the customer email wording, browse the full contract list and override a recorded decision |
| **Ops** | Work claims from start to finish: open, assign, assess, decide, draft and send messages, mark a claim fulfilled, write notes, compose a repair plan and decide repair estimates |
| **Viewer** | Read claims, their evidence, decisions and messages, and the repair plan, estimates, invoices and service record. Change nothing. |

Each member also has:

- **Scope**: which claims they see. Your members see your own organisation.
- **Approval limit**: the most they may approve on a single claim. When a claim is worth more than a member's limit, the portal says so and someone with a higher limit has to approve it. The member can still decline it. Leave the limit blank for no limit.

### Invite a team member

<Steps>
  <Step title="Open Team">
    In the Adjudicator Portal, open **Team**. Only an org admin sees it.
  </Step>
  <Step title="Send the invitation">
    Under **Invite someone**, enter the person's **Email**, choose a **Role** and, if you want one, an **Approval limit**. Click **Send invitation**.
  </Step>
  <Step title="Wait for SureBright to approve it">
    SureBright reviews each invitation. Until then it is listed under **Awaiting SureBright approval** and nothing is sent to the person. You can withdraw it with **Revoke invitation**.
  </Step>
  <Step title="The person signs in">
    Once approved, the person is emailed a sign-in link and appears under **Members**. Someone who already has a SureBright account is granted access straight away and can work claims the next time they sign in.
  </Step>
</Steps>

To change someone later, find them in the **Members** table: pick a new role and confirm with **Change role**, edit their approval limit, or click **Revoke access**. Their decisions on past claims stay on record.

## How the AI coverage assessment helps you decide

When a claim is filed, and again whenever new evidence or a corrected description arrives, the AI reads the customer's account and the photographs against the plan's coverage for that product and proposes an answer. You see it on the claim under **Coverage assessment**, with its reasoning, the parts of the plan it rests on and the words it quoted from the customer.

| The assessment says | What it means | What you can do |
|---|---|---|
| **Covered** | The plan covers this incident. It may rest on a condition you should check first, listed under **What this answer assumes** (for example, that the customer has really lost use of the product). | Approve, or decline if you disagree |
| **Not covered** | The plan excludes this incident. | Decline with a reason, or approve anyway and say why |
| An answer with a caution | The AI reached an answer, but something is worth reading first, such as a photograph already used on an earlier claim. | Read the caution, then decide |
| **Agent could not assess this claim** | No answer. The assessment says what would unblock it: clearer photographs, more detail, more than one incident in the account, a product that does not match, or a gap SureBright has to fix. | Click **Request info** to ask the customer, or decide by hand |
| **A service matter** | The request is about a service or benefit, not a claim on the product. | Read the assessment, then decide |

Cautions, such as a photograph that contradicts the account, no evidence supplied or no incident date, travel with the answer. They never change it by themselves. The AI's quotes are checked against what the customer actually wrote, and an answer that rests on words the customer did not write is flagged for you to read yourself.

### The assessment proposes, you decide

With automation on **Suggest**, the default, an assessment changes nothing about a claim until a person acts on it.

- To act on it, click **Approve** or **Decline** on the claim.
- To ask the customer for what is missing, click **Request info**. The questions the assessment raised are filled in for you to edit and send.
- To get a fresh answer after new evidence arrives, click **Run it again**.
- If you disagree, click **Write my own reading** and record your own answer and why. Both readings stay on the claim, and SureBright uses your corrections to improve later assessments.

### Record the decision

| You click | What happens |
|---|---|
| **Approve**, then **Approve claim** | You choose **Replacement** or **Repair** where both are offered. The claim moves to **Awaiting fulfilment** and the approval email is prepared for the customer. |
| **Decline**, then **Decline claim** | You must pick a **Reason**, from **Never qualified** or **Not covered by the terms**. The claim closes as **Declined**, the customer is told the reason in fixed wording, and a 30-day appeal window opens. An appeal brings the claim back to a person. |

You can add a **Rationale** to either. It is saved on the claim and is not sent to the customer.

A recorded decision is never edited or deleted. An org admin can override one, which records a new decision beside the old one, and both stay visible. Overriding is limited to org admins because it changes an outcome the customer has already been told about.

<Note>Early access. The team, the assessment and the decision are worked in the Adjudicator Portal, which is enabled per organisation. Ask your SureBright contact. The claim settings apply to every organisation at their defaults.</Note>

## When SureBright asks you to inspect a returned unit

For some products SureBright asks you, the seller, to inspect the claimed unit before the claim is decided. You do the inspection; SureBright still makes the decision.

<Steps>
  <Step title="Receive the unit">
    SureBright tells you which claim the unit belongs to. If you need a return label for the customer, ask support on that claim before the customer ships.
  </Step>
  <Step title="Inspect it and send your findings">
    Reply to support with the claim number and what you found: the fault, its likely cause, whether it can be repaired, and photographs. Say plainly if you think the fault is damage rather than a breakdown, or if it matches an earlier claim on the same unit.
  </Step>
  <Step title="SureBright decides">
    SureBright passes your findings into the claim review. SureBright then contacts the customer with the outcome or the next step.
  </Step>
</Steps>

If the customer disputes your diagnosis, do not argue the claim with them. Send the claim number and the customer's objection to support. A declined customer can also appeal within 30 days, and the appeal is reviewed by a person. See [How a claim moves](/claims/overview#reopened-appealed-duplicate-and-split-claims).

## Related

- [Adjudicator Portal](/claims/adjudicator-portal): find your way around the portal your team works in.
- [How a claim moves](/claims/overview): stages, who a claim is waiting on and how it closes.
- [Resolutions and payouts](/claims/resolutions-and-payouts): replacement, repair and the contract's money pool.
- [Claim communications](/claims/communications): the emails your customer receives and how to reword them.
